Loading...
 
Skip to main content

Architecture / Installation


Simple Script Upgrade to 3.1

I am a non-technical user of tikiwiki. Simple Scripts says I have version 3.0 installed, but in the admin section of my wiki, it says version 2.2. I'm using version 5 of PHP on Blue Host.

SimpleS cripts says tikiwiki needs to be upgraded to 3.1. I followed the instructions to the letter but when I logged in on my normal login screen there was nothing but a blank screen.

I restored my backup via SimpleScripts, but now I don't know what to do. I've searched the forum a little, but did not understand the answers posted to those with the same problem.

Any advice? I obviously can't do any programming. I need to do this via Simple Scripts.

Pat

A blank screen usually means the server doesn't have enough memory allocated for PHP script execution. You should probably contact Bluehost and verify that you have sufficient PHP memory to run Tikiwiki. I think 32MB is the recommended amount. You should probably also let them know about the discrepancy in Tiki versions reported.

-- Gary

Blue Host actually changed the PHP memory from 32 MB to 500 MB for me, so that's not the problem. They say to ask on a tikiwiki forum about the Simple Scripts discrepancy.

Wow, that's a lot of PHP memory, so apparently that isn't the problem.

As for the discrepancy, the admin page gets its version information from a file in TikiWiki's lib directory. If that file reports 2.2, then for one thing we can say that file (/lib/setup/twversion.class.php) is not the 3.0 version, which casts suspicion on the files overall, I'd say, especially when there are behavior issues. In other words, it appears the upgrade wasn't complete.

-- Gary

So what do it do? Blue Host tells me that if I upgrade manually at ANY point, Simple Scripts will no longer work. Am I doomed to upgrade manually forevermore?

I had successfully upgraded from 2.2 to 2.3 to 2.4. But then I got lost in the tiki documentation and accidently upgraded to 3.1 instead of 3.0. I got an error message and had to restore to my original 2.2. So now, I'm back where I started.


Well, I'm confused now. If you restored to your original 2.2, then the admin page version number is correct? Is ))SimpleScripts(( still indicating some other version number? I don't understand what the current situation is.

Back at your original 2.2, is the site functioning OK, or are you getting errors?

There's normally no problem with upgrading from 2.4 to 3.1 instead of 3.0. It isn't necessary to upgrade to each version sequentially. I've upgraded sites from 1.9 to 3.0 a few times without a hitch, for example.

TikiWiki's installer is actually quite simple and smooth, so it's not really something to dread, if it comes to that. But you do need to know how to download the TikiWiki package, unzip it, and upload the files with FTP. If that sounds too daunting, then I guess working with ))SimpleScripts(( is the only way.

-- Gary

Thanks so much for helping me. Sorry for the confusion. Here's what happened:
1. Yesterday, I noticed on my Blue Host CPanel that my tikiwiki installation needed updating. So I upgraded it via Simple Scripts.
2. When I finished, I got my login screen, but after I logged in, I saw only a blank screen.
3. I went back to Simple Scripts and did a restore. Everything was fine. It was only at that point that I even noticed that Simple Scripts said it was at 3.0. I'm not positive what it said before that, although I THINK it said 3.0.
4. I was poking around in the admin pages of my wiki and happened to notice that they said I was at 2.2.
5. I read a suggestion on the TW forum that sometimes ISPs don't allocate enough PHP memory, so I called Blue Host and they helped me install an ini file and change the default from 32 to 500. I ran the upgrade again from Simple Scripts. Same result. I restored again. Everything was fine. SS still said I was at 3.0. TW still said I was at 2.2.
6. BH customer support and I theorized that I couldn't upgrade directly from 2.2 to 3.1, so between the TW documentation and BH CS, I successfully upgraded from 2.2 to 2.3, and then to 2.4. Everything was fine.
7. Then I tried to upgrade from 2.4 to 3.1. When I tried to log onto my wiki, I got an error message instead of the instruction to install that is described in the documentation.
8. Somehow I managed to get my original files restored. It was getting late, and I don't really remember how.
9. Now, I'm back where I began and afraid to do anything.

The good news is that in the midst of all that I did learn how to download the TW package, unzip it, and upload the files with FTP. So, I guess that's progress, right? 😊

What troubles me the most is that I thought I was keeping it updated, so I'm not exactly sure how I ended up so far behind. The only thing I can think of is that I would try to upgrade, run into a problem, restore, and then move on due to lack of time. Then I'd come back a few weeks later and do the same thing again. Last night, I finally had the time to stick with it, and hence, all these problems have surfaced.

What do you think I should do, now?

Pat


I know this is a late reply but maybe others can benefit from the answer.

I'm no genius here but I use Tiki and Blue Host and I've had the same problem. Blue Host's tech support guy was, as they always are, very helpful when I called today to solve the same problem.

He was not sure why but Simple Scripts had it's info wrong on what version I had. This problem has actually been around for me for a while. I'd been able to poke and prod Tiki and have managed to keep it limping along but with a few inexplicable problems.

Anyway he did this for me:

In simple scripts, choose uninstall and them hit the bottom remove button (the other one actually deletes the whole deal!) Then go back and choose install and then Import. The process deletes the files Simple Scripots has made about it's own install (doesn't actually touch any Tiki files) then it goes back and look for Tiki and updates it's own files as to what version you have.

If you blow it up doing this then call Blue Host and ask to have your account set back to the last bnackup. This resets everything in your account so you don't really want to do this unless you have to. Also the BH guy can do all this for you.

I also update the database from within Tiki to 7.0. Now I don't know if this will cause any issues the next time I update Tiki but the site's working (with a few bugs)

I'd be really interested in hearing from the Tiki wizards if this solution is proper or catastrophically dangerous.